GEOLiNK
Illustrative SMT line with two operators at a control station

Applications / configuration examples

Six scenarios. Exact model lists. No customer names.

These are configuration examples, not named customer case studies. Each one pairs a requirement with a board set and a sourced number.

Browse the boards

Illustrative scene. Scenarios are examples; model lists are real.

Scenarios 01–03

Three places a board earns its keep.

Illustrative factory vision cell with a robotic arm and control cabinet
Illustrative scene

Factory vision

Camera, serial, CAN and cabinet heat.

RP7003AW + ITX660B

Illustrative self-service kiosk in a bright retail concourse
Illustrative scene

Self-service kiosk

Touch display, dual output, 12–19 V.

AD600CA + TL500CA

Illustrative digital signage wall in a public concourse
Illustrative scene

Digital signage

Dual HDMI, long runtime, 12–19 V.

AD600CA + ITX660B

Scenarios 04–06

Three more, with the same rule.

Illustrative medical cart with a monitor in a clinical room
Illustrative scene

Medical cart

Compact 120 × 120 mm, 4 LAN, 9–36 V.

PNM-5210 + UT1003AW

Illustrative fleet vehicle interior with a dash-mounted computer
Illustrative scene

Fleet computer

9–36 V, 6 × COM, CAN header.

UT1003AW + RP7003AW

Illustrative energy cabinet with gateway equipment and cable ducts
Illustrative scene

Energy gateway

4 × LAN, 9–36 V, plant cabinet.

PNM-5210 + RP7003AW

Configuration examples / metric-led

Three configurations, three sourced numbers.

RP7003AW industrial motherboard, 3.5-inch SBC, 146 × 102 mm

Vision station

US$125,000/hour

Median cost of unplanned manufacturing downtime. RP7003AW carries 6 × COM and 2 × CAN; ITX660B carries compute.

RP7003AW + ITX660B

RP7003AW spec card
AD600CA industrial motherboard, NUC, 100 × 100 mm

Checkout lane

US$800–900/hour

Checkout-lane loss at the cited rate. AD600CA carries dual display and LAN; TL500CA is the compact NUC alternative.

AD600CA + TL500CA

AD600CA spec card
PNM-5210 industrial motherboard, NANO-ITX, 120 × 120 mm

Energy gateway

4 kVEFT target

the substation EMC standard cites 4 kV EFT; this is a target, not a board test result. PNM-5210 supplies 4 × LAN; RP7003AW adds serial and CAN.

PNM-5210 + RP7003AW

PNM-5210 spec card

Board views / configuration detail

Where the interfaces sit.

RP7003AW industrial motherboard, 3.5-inch SBC, 146 × 102 mm, COM and CAN headers
RP7003AW · COM and CAN headers
TL500CA industrial motherboard, NUC, 100 × 100 mm, I/O edge
TL500CA · NUC I/O edge
UT1003AW industrial motherboard, 3.5-inch SBC, 146 × 102 mm, rear I/O
UT1003AW · rear I/O

Scenario to model

Each row names the limit as well as the fit.

Requirement-to-model matrix · model lists are real; scenarios are examples
ScenarioRequirementModelWhat is not claimed
Factory vision6 × COM, 2 × CAN, cabinet heatRP7003AW + ITX660BNot a vision controller
Self-service kioskDual display, 12–19 VAD600CA + TL500CANot a payment terminal
Digital signageDual HDMI, long runtimeAD600CA + ITX660BNot a media player
Medical cart120 × 120 mm, 4 × LANPNM-5210 + UT1003AWNo medical certification
Fleet computer9–36 V, 6 × COMUT1003AW + RP7003AWNot a vehicle ECU
Energy gateway4 × LAN, 9–36 VPNM-5210 + RP7003AWNo substation certification

Boundary / who certifies what

The board is a component. The equipment carries the certificate.

Board to equipment certification boundary Three stages: GEOLiNK supplies the board and spec card; the integrator builds the enclosure and power; the finished equipment carries the system certificate. 01 / BOARD Board + spec card I/O and rating stated Component level 02 / INTEGRATION Enclosure and power Cooling, wiring, EMC Integrator design 03 / EQUIPMENT Finished system Carries the certificate Equipment level

Ratings travel with the board; equipment certification with the finished system. Documents are requested per model.

Disclosure

What this page does not show.

No customer names, no project values and no site photographs. The six scenarios are configuration examples built from real model lists.

  • Customer namesWithheld
  • Project valuesNot published
  • Site photographsNot used
  • Scenario statusConfiguration example
Illustrative self-service terminal opened to show the integrated board
Illustrative scene, self-service terminal. Not a customer site.

Before the inquiry

Two questions about the examples.

Are these real customers?

No. They are configuration examples, not named customer case studies. The model lists are real.

Can you build the same configuration?

Yes, start from the model list. Send the quantity, country and enclosure constraints; we confirm the closest build and quote within 24–48 h.

Illustrative data-centre aisle with server racks

Next step / configuration

Send the scenario and the model list.

Tell us the application, the I/O count and the operating range. We reply with the closest configuration and the documents we hold. Quote within 24–48 h.

See all motherboards

Illustrative scene, server rack aisle. Not a site photograph.