8K / Mini-ITX
TOP800B
HDMI 2.1 at 8K, plus HDMI 2.0, VGA/DP and LVDS/eDP; 28 W Core Ultra.
- Outline
- 170 × 170 mm
- Power
- DC 12–19 V
Illustrative scene
Industry / Digital signage
Displays do not fail on schedule. Heat, dust and reboots do.
Signage boards for players that run unattended: low-heat envelopes, watchdog supervision and dual HDMI on 12–19 V.
Board is a component. GEOLiNK sells the board, not the display or CMS.
0–50 °C
common player rating
50 °C+
reset risk begins
The failure pattern / sourced
Heat is the schedule.
0–50 °C
Common player rating. Above 50 °C can cause resets.
5–7 years
Typical commercial signage player life.
−25/+70 °C
Outdoor and transit players, or −20/+70 °C.
−20/+60 °C
Board rating across the three recommended models.
Requirement to answer
Demands and board answers.
A signage player is a thermal and output problem first.
- Player heat 28 W tiers rated −20 °C to +60 °C; the enclosure owns the airflow.
- Player life Five to seven years is the norm; the board is one replaceable part.
- Outputs HDMI 2.1 8K on TOP800B; dual HDMI plus Type-C on the NUCs.
- Recovery Watchdog 0–255 s with sample code on TOP800B.
Recommended configurations / three models
Ordered by peak output.
Four display paths each; peak resolution separates them.
Spec to model
What each requirement becomes.
| Requirement | Matching value | Model | What is not claimed |
|---|---|---|---|
| Single 8K panel | HDMI 2.1, 8K@60 | TOP800B | 8K on the other outputs |
| Two 4K HDMI screens | 2 × HDMI 2.0, 4K@60 | AD600CA | 8K over HDMI |
| USB-C displays | 2 × Type-C, DP 8K@60 | AD600CA | Power delivery over Type-C |
| Low heat load | 28 W processor tier | TOP800B, AD600CA, UT100CA | Enclosure thermal design |
| Auto-restart after a hang | 0–255 s watchdog, sample code | TOP800B | Watchdog on models without it |
| 12–19 V input | DC 12–19 V | All three | Mains AC or PoE input |
Values from the model cards. The last column is the boundary.
System boundary
Where certification changes hands.
The board leaves Piesia with board-level documents. The enclosure, display and CMS belong to the integrator, who type-tests the finished equipment.
Ask for the model documents, then certify the equipment built around the board.
Configuration example / transit hall
A player that restarts before the queue notices.
A transit-hall player sits behind a sealed front panel. The enclosure reaches 50 °C+ and the player resets. The board cannot fix the enclosure; it can lower the heat load and add a recovery timer.
50°C+
the point where resets begin for common players
- Board: TOP800B at 28 W, HDMI 2.1 to the 8K panel.
- Second player: AD600CA, dual HDMI plus Type-C.
- Recovery: watchdog enabled in BIOS; sample code supplied.
A configuration example, not a named customer or a tested installation.
Before the inquiry
Certification and temperature, answered.
Is the board certified as a signage player?
No. Board-level documents are available on request per model. The finished player is type-tested and certified by the equipment integrator.
Which model should I shortlist for 8K?
TOP800B. Its HDMI 2.1 output runs 8K@60. The other outputs are HDMI 2.0, VGA/DP and LVDS/eDP.
What happens after a software hang?
TOP800B carries a 0–255 second watchdog with sample code. Recovery on the other models depends on the operating system and the integrator's configuration.
Can GEOLiNK supply the complete player?
No. GEOLiNK supplies the board; manufacturing of customized boards is by Piesia. The enclosure, display and CMS stay with the integrator.
Illustrative scene
Inquiry / Digital signage
Send the panel count and the peak resolution.
TOP800B, AD600CA or UT100CA, quote within 24–48 h.
GEOLiNK sells the board, not the display or the CMS. No complete signage solution is claimed.
